PhD in Materials Science and Technology Admission 2024-25, Check Marking Scheme, Online Process, Direct Admission

PhD in Materials Science and Technology About

PhD in Materials Science and Technology is a doctoral program and it takes 3 – 5 years to complete the entire course. The course provides the students with a broad understanding of the field of materials science engineering and also gives a deep insight into the numerous materials that are making a difference in the technological progress that we are witnessing in various sectors such as aerospace, nuclear power, aviation, metals industry, construction, petroleum and so on. The eligibility criteria for applying for this PhD course is a postgraduate degree in Material Science with at least 55% marks in aggregate. Admission to the program is done based on an entrance test followed by an interview conducted by the concerned university. Those with an M.Phil degree or have qualified the UGC NET, CSIR-UGC NET and other similar eligibility exams need not to appear for the entrance test. 

PhD in Materials Science and Technology Highlights

PhD in Materials Science and Technology Admission Process

PhD in Materials Science and Technology Duration

The duration of a PhD in Materials Science and Technology program is typically 4-5 years of full-time study, though some programs may allow for part-time study.

PhD in Materials Science and Technology Selection Criteria

Selection criteria for admission to a PhD in Materials Science and Technology program may include a combination of academic performance, entrance exam scores, letters of recommendation, statement of purpose, and research experience.

PhD in Materials Science and Technology How to Apply

PhD in Materials Science and Technology Application Form

The application form for a PhD in Materials Science and Technology program can usually be found on the website of the university or college offering the program. Candidates are required to fill in their personal details, academic qualifications, research experience, and other relevant information. Candidates may also need to upload scanned copies of their transcripts, entrance exam scores, and other supporting documents.

PhD in Materials Science and Technology Application Process

The application process for a PhD in Materials Science and Technology program typically involves the following steps:

PhD in Materials Science and Technology Fee Structure

The fee for a PhD in Materials Science and Technology program varies depending on the university or college offering the program. The fee can range from a few thousand to tens of thousands of dollars per year.

PhD in Materials Science and Technology Syllabus

PhD in Materials Science and Technology Salary and Jobs

Graduates of a PhD in Materials Science and Technology program can expect to find employment in a variety of industries, including aerospace, automotive, biomedical, electronics, energy, and materials manufacturing. The average salary for a materials scientist with a PhD is around $100,000 per year, though salaries can vary widely depending on the industry and the specific role. Some job titles for PhD in Materials Science and Technology graduates include materials scientist, research scientist, materials engineer, and academic researcher.

PhD in Materials Science and Technology Career Opportunities

Graduates of a PhD in Materials Science and Technology program can pursue careers in academia, industry, or government agencies. Some of the career opportunities available to graduates of this program include:

PhD in Materials Science and Technology Top Colleges

Some of the top colleges offering PhD in Materials Science and Technology programs include:

1. Massachusetts Institute of Technology (MIT)
2. University of California, Berkeley
3. Stanford University
4. California Institute of Technology (Caltech)
5. Georgia Institute of Technology
6. University of Illinois at Urbana-Champaign
7. Northwestern University
8. University of Michigan-Ann Arbor
9. Pennsylvania State University
10. University of Wisconsin-Madison

PhD in Materials Science and Technology Admission Procedure

• Application for the entrance exam 
•  Result declaration
• Entrance pass scholar calling for the interview and document verification
• Provisional registration for pre Ph.D. course work classes
• Coursework classes shall be attended as scheduled by University
• Course work examination
• Result declaration of coursework
• Submission of synopsis ( 2 spiral bound copies with soft copy of synopsis)
• Departmental research committee meeting scheduled by University
• A registration letter shall be issued
• Research work started by scholar
• 6 progress reports shall be submitted
• Soft copy thesis submit
• plagiarism report check by the university
• Final after the plagiarism report soft copy thesis shall be sent to experts for evaluation
• After the consent of experts pre-submission, one set spiral binding shall be submitted
• After the successful presentation of the pre-submission thesis 3 copies of hard bound thesis shall be  submitted
• Viva shall be conducted as scheduled by University, Degree Awarded.

PhD in Materials Science and Technology Documents Checklist

1.  Documents (10th onwards)
2. Aadhar Card/Pan Card, Caste Certificate
3. Migration Certificate (Original)
4. NOC (From Organization/ Institute/ University)
5. Affidavit (undertaking)
6. Guide Willing
7. Assignments
8. Synopsis (3 copies), Progress Report
9. Library No Dues
10. Lab Letter
11. Thesis Hard copy (Spiral binding)
12. No Dues, Thesis (6 hard copies)
13. Affidavit -Submission (on Rs 100 Stamp and Notary Attested)
14. C.D Soft copies (Thesis & Synopsis)
15. Conference Certificate - 2
16. Research Papers -2 (with ISSN No.)
17. summary (page limit 20-30) -3 Copies 
18. Plagiarism Report Below 10%

FAQs About PhD in Materials Science and Technology

Q.1 - What is the procedure for PhD Admission to the University?

ANSWER: - The Ph.D. and M.Phil. programs of prestigious Universities are conducted and guided strictly as per the provisions and regulations dictated by the UGC (Minimum Standards and Procedure for Award of Ph.D./M.Phil. Degrees) (1st Amendment) Regulations, 2018 and subsequent amendments. The entire procedure for admission to the research programs encompasses a Research Entrance Exam (RET) and then an Interview/Viva Voce. The performance of a candidate in the RET is given 70% weightage, and the remaining 30% weightage is given to his/her performance at the Interview.

Q.2 - What are the modes of pursuing M.Phil. & Ph.D. programs at the University?

ANSWER: -Both the full-time and part-time modes are available at University for pursuing its Ph.D. programs and only the full-time mode is available for M.Phil. program in the desired subjects/fields. These highly-qualitative and prolific research programs are available in a rather broad range of fields/subjects. At University, the minimum time duration of the M.Phil. and Ph.D. programs is 1.5 Years and 3 Years, respectively, in general.

Q.3 - Are the Ph.D. and M.Phil. Degrees granted by any University valid abroad?

ANSWER: -Yes, of course. If the University is properly recognized under section 2(f) of the UGC Act of 1956 and is a prestigious member of the AIU (the Association of Indian Universities). It is an M.Phil. and Ph.D. degrees granted in various fields/subjects are duly valid across India and the world.

Q.4 - What are the main eligibility criteria for participating in the University Research Entrance Exam (RET)?

ANSWER: -The following are the main eligibility conditions for participating in the RET: - A rigorous Master’s Degree in the proposed subject/field obtained from any recognized university/institution located in India or abroad, with a minimum 55% marks in aggregate or an equivalent grade. Candidates belonging to SC/ST/OBC/Differently-abled categories are given a 5% relaxation in respect of this eligibility criterion. Candidates with an M.Phil. degree in the proposed field/subject, or have qualified for the UGC (JRF) Examinations/ NET/ SET/ SELT, etc., will be allowed to appear directly for the interview, without appearing in the RET. Impressive academic records, and any prior experience in research work, will be given additional advantages.

Q.5 - What relaxations are granted to the reserved categories for Ph.D.? Admission to the University?

ANSWER: - Candidates belonging to the categories of SC/ST/OBC (Non-Creamy layer)/Differently-Abled, and so on, are given all relaxations prescribed by the Govt. of India and the UGC. These relaxations are provided in form of 5% reduced marks for them at post-graduation, and also in the minimum qualifying marks at RET. Thus, candidates belonging to these categories only need to score a minimum of 45% marks at RET, to qualify for the final interview.

Q.6 - How will be the pattern of RET?

ANSWER: - The syllabus or pattern of RET consists of subject-specific matters, research methodology, and aptitude (covering logical reasoning, numerical ability, analytical reasoning, statistics, etc.).Thus, RET will contain a total of 70 multiple-choice questions (MCQs).

Q.7 - Are M.Phil. Holders/UGC- NET (including JRF)/ UGC-CSIR NET (including JRF)/ SLET/ GATE exempted from appearing at RET?

ANSWER: - Yes. The holders of M.Phil. degrees in their respective fields/subjects are made exempt from appearing in RET. The same is the situation in cases of aspiring candidates who have qualified exams like UGC-NET (including JRF)/ UGC-CSIR NET (including JRF)/ SLET/ GATE, etc.

Q.8 - How is the application fee paid?

ANSWER: - The Application Fee (i.e. the fee for getting participated in RET) can be paid online or offline, like the Application Form. Payment Modes: DD (in Favor of the University) / NEFT/ Cash Deposit.

Q.9 - Do working candidates require to obtain NOC from employers for pursuing research at any University?

ANSWER: - Yes, necessarily. Working Professionals who are interested in research at any University are required to obtain the NOC (No Objection Certificate) from their respective employers, in order to avert any intrusion ever during the entire doctoral course.

Q.10 - Does an M.Phil. holder require to undergo Ph.D. coursework?

ANSWER: - Yes. M.Phil. holders are again required to undergo the coursework in Ph.D. at some Universities. However, their prior knowledge in the field/subject will be very supportive to them for learning and performing efficiently during the Ph.D. program.

Q.11 - Can I pay the yearly program/course fee in installments?

ANSWER: - Yes, you can pay the yearly course fee as many as in two installments, but well within the yearly session.

Q.12 - Does Any University provide any scholarship or stipend to pursuing scholars?

ANSWER: - Yes, of course. Many Universities offer scholarships as well as stipends to meritorious and talented candidates who undertake research studies at the University. Scholarships are granted to those candidates who come under the top 21 by scoring higher marks in RET and interviews. And, stipends are provided to those scholars who also give lectures to UG or PG students at the University, in addition to doing their Ph.D. coursework. The amount of the monthly stipend will be commensurate with the candidate’s qualifications and capabilities and may go up to Rs. 20,000.

Q.13 - What other many facilities are provided to research scholars at the University Campus?

ANSWER: - All necessary and constructive resources, amenities, and facilities are offered by well-established and prestigious universities to research scholars in various streams/subjects. These facilities include the following - spacious and peaceful study rooms, erudite and well-experienced academicians and research experts, Wi-Fi and diverse IT devices, state-of-the-art laboratories, well-stocked libraries, lavish R&D amenities, separate amenities for lodging and foods for male and female candidates, peaceful and constructive environment within the university campus, and many other comforting and convenient facilities and services.