PhD in Material Science is a doctoral program and it takes 3 – 5 years to complete the entire course. The course provides the students with a broad understanding of the field of materials science engineering and also gives a deep insight into the numerous materials that are making a difference in the technological progress that we are witnessing in various sectors such as aerospace, nuclear power, aviation, metals industry, construction, petroleum and so on. The coursework for the PhD program typically includes advanced courses in materials science and engineering, as well as courses in related fields such as biochemistry, biomechanics, and biomaterials. Students also conduct independent research under the guidance of a faculty advisor and are required to complete a thesis based on their research. Graduates of MD-PhD programs in Materials Science and Engineering are well-prepared for careers in a variety of fields, including academia, industry, and government. They may work as medical researchers, biomedical engineers, or materials scientists, developing new materials and technologies to improve patient care and advance medical science.
Course Level | Doctorate Degree |
Full-Form | Doctor of Philosophy in Material Science |
Duration | 3 - 5 Years |
Examination type | Coursework plus Research |
Eligibility | Master degree in Material Science |
Admission Process | Entrance test and personal interview |
Top Recruiting Companies | Micron, Whitehall International, Indian Institute of Science (IISc), CSIR, ESAB India, Shell, Jacobs Engineering Group, General Electric, DRDO, ISRO, BHEL, BEL, BMEL |
Job Positions | Material Scientist, Research Associate, Material Science Engineer, Research Scientist, Material Informatics Scientist, Project Associate, Senior Materials Scientist, Project Scientist, Biomaterial Scientist |
The entrance exam required for admission into an MD-PhD in Materials Science and Engineering program may vary depending on the specific institution. Most programs require students to take the MCAT (Medical College Admission Test) for medical school admission and the GRE (Graduate Record Examination) for the PhD program.
Entrance Exam
|
Candidates should hold a masters degree in material science or a related stream of engineering. |
Should have a bachelor's degree in material science and engineering. |
Should have a master degree in science in a relevant stream. |
Minimum 55% marks in aggregate in the qualifying exam. For institutes like IITs, the minimum requirement is 60%. For SC/ST/PwD candidates, there is a 5% relaxation in marks. |
The program typically takes 7-8 years to complete, with the first two years focused on medical school coursework and the remaining years dedicated to the PhD program and research.
The selection criteria for an MD-PhD in Materials Science and Engineering program may include academic record, entrance exam scores, research experience, letters of recommendation, and personal statements. Some programs may also require interviews with applicants.
The application process for an MD-PhD in Materials Science and Engineering program typically involves filling out an online application form, submitting transcripts, entrance exam scores, letters of recommendation, a personal statement, and any other required materials. Some programs may require an application fee. It's important to carefully review the specific application requirements for each program before applying.
Theories and Concepts in Material Science Engineering |
Advanced Methods of Research in Material Science Engineering |
Failures: Fracture Mechanics |
Composites of Metals |
Issues of material usage: Economical, Environmental and Social |
Application and Processing: Metals, Alloy, Polymer, Ceramics |
Metals: Material Properties |
Properties: Thermal, Optical, Electrical and Magnetic |
Corrosion and Degradation |
Writing Research |
Media Seminar |
Job Profile | Job Description |
Materials Scientist | The job of a Material Scientist is to study and research materials for their structure and chemical properties. The materials could be fabricated or natural, like glass, metals, alloys, composites, ceramics, polymers, rubbers and so on. |
Material Science Engineer | A Material Science Engineer is basically involved in the development of newer materials. They are involved in the development process right from selecting the right raw material to carrying out various tests before coming up with the final product. |
Biomaterial Engineer | Biomaterial Engineers and Scientists apply the knowledge of both biology and material science engineering in the designing and development of various medical devices and products like artificial joints, pacemakers, defibrillators, etc. |
Material Informatics Scientist | A Material Informatics Scientist works towards the application of the principle of informatics to material science engineering. They help in the understanding, selection and development of newer materials through data analysis and management techniques. |
Project Manager | Project managers are professional responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope |
Graduates of MD-PhD in Materials Science and Engineering programs have a range of career opportunities available to them, including academic research positions, industry research and development roles, and government research positions. They may also work as consultants, patent attorneys, or entrepreneurs, developing and commercializing new technologies.
Some of the top colleges offering MD-PhD in Materials Science and Engineering programs include:
Q.1 - What is the procedure for PhD Admission to the University?
ANSWER: - The Ph.D. and M.Phil. programs of prestigious Universities are conducted and guided strictly as per the provisions and regulations dictated by the UGC (Minimum Standards and Procedure for Award of Ph.D./M.Phil. Degrees) (1st Amendment) Regulations, 2018 and subsequent amendments. The entire procedure for admission to the research programs encompasses a Research Entrance Exam (RET) and then an Interview/Viva Voce. The performance of a candidate in the RET is given 70% weightage, and the remaining 30% weightage is given to his/her performance at the Interview.
Q.2 - What are the modes of pursuing M.Phil. & Ph.D. programs at the University?
ANSWER: -Both the full-time and part-time modes are available at University for pursuing its Ph.D. programs and only the full-time mode is available for M.Phil. program in the desired subjects/fields. These highly-qualitative and prolific research programs are available in a rather broad range of fields/subjects. At University, the minimum time duration of the M.Phil. and Ph.D. programs is 1.5 Years and 3 Years, respectively, in general.
Q.3 - Are the Ph.D. and M.Phil. Degrees granted by any University valid abroad?
ANSWER: -Yes, of course. If the University is properly recognized under section 2(f) of the UGC Act of 1956 and is a prestigious member of the AIU (the Association of Indian Universities). It is an M.Phil. and Ph.D. degrees granted in various fields/subjects are duly valid across India and the world.
Q.4 - What are the main eligibility criteria for participating in the University Research Entrance Exam (RET)?
ANSWER: -The following are the main eligibility conditions for participating in the RET: - A rigorous Master’s Degree in the proposed subject/field obtained from any recognized university/institution located in India or abroad, with a minimum 55% marks in aggregate or an equivalent grade. Candidates belonging to SC/ST/OBC/Differently-abled categories are given a 5% relaxation in respect of this eligibility criterion. Candidates with an M.Phil. degree in the proposed field/subject, or have qualified for the UGC (JRF) Examinations/ NET/ SET/ SELT, etc., will be allowed to appear directly for the interview, without appearing in the RET. Impressive academic records, and any prior experience in research work, will be given additional advantages.
Q.5 - What relaxations are granted to the reserved categories for Ph.D.? Admission to the University?
ANSWER: - Candidates belonging to the categories of SC/ST/OBC (Non-Creamy layer)/Differently-Abled, and so on, are given all relaxations prescribed by the Govt. of India and the UGC. These relaxations are provided in form of 5% reduced marks for them at post-graduation, and also in the minimum qualifying marks at RET. Thus, candidates belonging to these categories only need to score a minimum of 45% marks at RET, to qualify for the final interview.
Q.6 - How will be the pattern of RET?
ANSWER: - The syllabus or pattern of RET consists of subject-specific matters, research methodology, and aptitude (covering logical reasoning, numerical ability, analytical reasoning, statistics, etc.).Thus, RET will contain a total of 70 multiple-choice questions (MCQs).
Q.7 - Are M.Phil. Holders/UGC- NET (including JRF)/ UGC-CSIR NET (including JRF)/ SLET/ GATE exempted from appearing at RET?
ANSWER: - Yes. The holders of M.Phil. degrees in their respective fields/subjects are made exempt from appearing in RET. The same is the situation in cases of aspiring candidates who have qualified exams like UGC-NET (including JRF)/ UGC-CSIR NET (including JRF)/ SLET/ GATE, etc.
Q.8 - How is the application fee paid?
ANSWER: - The Application Fee (i.e. the fee for getting participated in RET) can be paid online or offline, like the Application Form. Payment Modes: DD (in Favor of the University) / NEFT/ Cash Deposit.
Q.9 - Do working candidates require to obtain NOC from employers for pursuing research at any University?
ANSWER: - Yes, necessarily. Working Professionals who are interested in research at any University are required to obtain the NOC (No Objection Certificate) from their respective employers, in order to avert any intrusion ever during the entire doctoral course.
Q.10 - Does an M.Phil. holder require to undergo Ph.D. coursework?
ANSWER: - Yes. M.Phil. holders are again required to undergo the coursework in Ph.D. at some Universities. However, their prior knowledge in the field/subject will be very supportive to them for learning and performing efficiently during the Ph.D. program.
Q.11 - Can I pay the yearly program/course fee in installments?
ANSWER: - Yes, you can pay the yearly course fee as many as in two installments, but well within the yearly session.
Q.12 - Does Any University provide any scholarship or stipend to pursuing scholars?
ANSWER: - Yes, of course. Many Universities offer scholarships as well as stipends to meritorious and talented candidates who undertake research studies at the University. Scholarships are granted to those candidates who come under the top 21 by scoring higher marks in RET and interviews. And, stipends are provided to those scholars who also give lectures to UG or PG students at the University, in addition to doing their Ph.D. coursework. The amount of the monthly stipend will be commensurate with the candidate’s qualifications and capabilities and may go up to Rs. 20,000.
Q.13 - What other many facilities are provided to research scholars at the University Campus?
ANSWER: - All necessary and constructive resources, amenities, and facilities are offered by well-established and prestigious universities to research scholars in various streams/subjects. These facilities include the following - spacious and peaceful study rooms, erudite and well-experienced academicians and research experts, Wi-Fi and diverse IT devices, state-of-the-art laboratories, well-stocked libraries, lavish R&D amenities, separate amenities for lodging and foods for male and female candidates, peaceful and constructive environment within the university campus, and many other comforting and convenient facilities and services.